New Tree of Life and Owl pendants

These two pendants flew out of the door quicker than they came out of the kiln. They measure about 35mm across and are set of silver plated bails and stainless steel chain.
Gold tree of life pendantSilver Owl Pendant

The Tree of Life pendant has, as you can see a beautiful dichroic green glass base with 22ct gold image fired into the top glass. The Owl has a more multi-coloured dichroic glass base and is also fired into the top glass.
I saw the Tree of Life pendant worn at the weekend, it looked stunning, catching the sunshine on both the dichroic glass and the gold. If only I could make the picture look as good.
I will definitely  be making a few more of these designs in the future. If you would like to see other designs I make then please take a look at my website 
and my facebook page 
Thanks for stopping by and hope you come back soon.
Steve :-)

Tree of Life hair clip.

The challenge should I choose to accept it was to make a Tree of Life hair clip for a customer in the USA.
Well the challenge was on. There was many possible problems with this, I was not sure if I could actually do it.
First things first, 
choose the glass, 
Streaky green glass for Tree of life hair clip
the customer had already requested streaky green so that was the easy bit.
The idea was to make the approximate shape by using a fibre kiln material
making of Tree of life hair clip
Here is a piece!
Then, cut the desired shape out, as the next picture shows.
Sorry about this but I seem to have a few picture missing. But basically I cut the glass in fit inside them shape. One long strip and two half moons pieces. I then repeated this with the top glass. Fitted all the pieces into the cut out and fired for the first time.
Once the firing cycles had been completed, I removed the glass from the fibre material, cleaned up the edges to reduce de-vitrification on the glass for the second firing. Like I said, I fired this cleaned glass again for the second time.
I now had a flat, streaky correct shaped glass cabochon.
The next stage was to bend the glass.
With a 4" square sheet of copper, curved to fit the curvature of the hair clip. See the following picture, although the picture does not show the 5 coats of kiln wash to stop the glass sticking to the copper.
copper former for Tree of life hair clip
I then fired the cabochon on a slumping cycle, not as hot as fusing the glass but enough to let the glass fall into to right shape over the copper
Fired Tree of life hair clip
Once this had cooled,


Decal for Tree of life hair clip
 I applied the entwined Tree of Life decal onto the center of the cabochon.And fired it once again.
Fired Tree of life hair clip
After leaving the new creation to cool completely. 
The cabochon was glued to the curved hair clip with E6000 glue.
Hair clip base
Then totally left alone for 48 hours (glue drying time). 
I presented it in a beautiful heart shaped box, all ready to be posted over to the USA.

finished Tree of life hair clip
Then a few weeks later I receive this picture.
finished Tree of life hair clip, picture from customer in USA
I was so please it all worked out in the end. I have missed a few points out as an alchemist can't give away all his secrets.
A massive thank you to my customer for letting me accept this challenge and for ordering my hand made jewellery.
Thanks for reading.
Steve
PS. if you have an idea of a piece of jewellery made from glass, please contact me via stevesmithjewellery@yahoo.co.uk and I will see what I can do, but no promises LOL.......

The Matrix, dichroic glass pendants.

Hi all.
I have made one of these before and it got snapped up really quick so here are two new designs of "The Matrix" let see what happens!!!!
The matrix film has a massive cult following all over the world and they are in my top ten films I enjoy to watch and they also make me think about the bigger picture.
The first pendants is about 4cm x 2cm (with the bail) and comes complete with a 40cm stainless steel chain.
The second pendant is a bit larger, measuring about 4.5cm x 3cm (including bail) and also come with a 40cm stainless steel chain.
To order either of these or any other pieces listed on here, my facebook page or my website then please feel free in emailing me your request.
Thanks for looking and hope you see something that you like.

LinkWithin

Related Posts Plugin for WordPress, Blogger...